Posts Tagged ‘plumbers’

Help Your Environment By Choosing Solar Water Heaters

Monday, May 17th, 2010

Solar hot water heater is beneficial in many ways but many of us have not heard about it or don’t know about its uses and benefits. From a water heater our basic requirement is hot water only. Here we will discuss some of the benefits of using a solar water heater in comparison to other traditional water heaters.

Choosing a solar water heater for your house makes it eco-friendly and green. It not only saves limited electrical energy and natural gas but also saves our environment from getting polluted. Solar water heater uses solar energy that is unpolluted as well as free.

You should devise all ways of saving money in our day to day life and installing a solar water heater is one such way. You just need to spend little money in its installation and after that it would not cost you much. The money spend in installation would be recovered in form of monthly utility bills because after installing solar water heater you would be using free supply of sunlight to heat water and your monthly electricity bills will be saved.

Few people think that solar heater does not work in a cold area but now due to advancement in solar energy collection, a solar water heater is also able to collect solar energy in a cold area and climatic condition do not affect its working.

The best part about solar hot water heaters is that they are very simple. They involve collecting energy from sun and then circulating it. There are some completely different varieties of solar hot water systems that use different strategies of functioning. Generally there are three different solar energy collection strategies that can be employed by these solar hot water heaters.

These include the flat plate collectors that we generally think of when we hear solar panels, evacuated tube solar collectors which use rows of glass tubes that are connected to a fin that includes a coating which absorbs solar energy and integral collector storage system that heats the water as it passes through the collector.

According to climatic conditions, different circulation systems are used. In case water freezing does not occur in your pipes then heaters with a direct circulation system is a good choice. It heats water on collection before it is circulated into your home. However, in case you are living in a colder climate then solar water heaters with an indirect circulation system will be good for you.

Now that you recognize the great advantages to using solar hot water heaters, you can start living a greener lifestyle and saving money on your monthly utility bills.

Scott Rodgers is a noted author who has been providing ample guidance on plumbing works all over the country. His expensive knowledge has, in fact, sparked significant rise in revenue for talented plumbers across the nation, from Clearwater Plumbers to Clearwater Beach Plumbers .

Share and Enjoy:
  • Digg
  • del.icio.us
  • Facebook
  • NewsVine
  • Reddit
  • StumbleUpon
  • Google Bookmarks
  • Yahoo! Buzz
  • Twitter
  • Technorati
  • Live
  • LinkedIn
  • MySpace
  • Share/Bookmark

Some Easy Ways Of Solving Problem Of Frozen Water Pipes

Sunday, May 16th, 2010

Winter season is very crucial for your plumbing so your plumbing needs special care during that. In below mentioned paragraphs we will learn some easy ways of preventing pipe burst in winter.

You must know that plumbing in your home can freeze if you live in a region where the temperature drops below freezing point. Pipes in your home can freeze and subsequently burst if not properly maintained. Not only does the ruptured plumbing needs repair but the collateral water damage can also be very destructive. A few simple steps can save much of destruction.

Start doing protection from outside of your home. For this, you need to disconnect all hoses and store them properly for winters. If you will leave them connected then it might also damage your faucet. Inspect all the faucets properly to ensure that there are no leaks or drips as it could badly damage your plumbing.

Also find out the pipes that are located in unheated spaces of your home. Garage is a place where it is generally seen. To prevent freezing, cover the pipes in foam padding specially designed for the job. For getting this padding, you may visit any nearby hardware or home improvement stores. This padding insulates the pipe and reduces the chances of freezing to a great extent. One other good way is to cover the pipes with rags and duct tape but in case of slow leaks your pipes will wet the rags and due to this their insulation power reduces.

Throughout winter it is advisable to allow each faucet in your home to run periodically. Pipes can freeze very slowly and running hot water through them can melt any accumulated ice in the lines. It is also advised to follow this procedure more often with faucets located on an outside wall.

Additionally, make sure that you are heating all spaces in your home. It is often difficult to tell where pipes are located in your walls.

If you will put space heaters or lamps near pipes in unheated areas then it will also help in raising the temperature and preventing water freezing. It is a quick way of solving the problem when temperature falls down all of sudden.

Hence, by now you must be aware about some basic ways of preventing water pipes from freezing. These ways are not very expensive and are simple to execute. To know more about water pipes freezing and their prevention, you may take guidance of a local plumber or contractor.

Scott Rodgers is a noted writer who has been providing ample guidance on plumbing works all over the country. His expensive knowledge has, in fact, sparked significant rise in revenue for talented plumbers across the nation, from Norcross Plumbers to Ball Ground Plumbers .

Share and Enjoy:
  • Digg
  • del.icio.us
  • Facebook
  • NewsVine
  • Reddit
  • StumbleUpon
  • Google Bookmarks
  • Yahoo! Buzz
  • Twitter
  • Technorati
  • Live
  • LinkedIn
  • MySpace
  • Share/Bookmark

Tankless Water Heater Helps In Saving Your Utility Bills

Thursday, May 13th, 2010

The most important benefit of using a tankless water heater is to heat the water whenever required. It does not contain any tank for storing water. Using this alternative of heating water, you can save a great deal of money that would otherwise be spent in form of utility bills.

You need to have hot water while bathing, showering, washing dishes, cleaning our clothes and for soaking in the tub. In case you would not have hot water then it would be difficult to clean the dishes and other things that are being used on daily basis.

Once you will start using tankless water heater, you will discover a sudden fall in your utility bills. The lowering of your utility bill will depend on the factor that how much water is being used at your home.

Other types of water heating systems continuously heat the water in your home even when you are not there for a week or two. On the other hand tankless water heater heats only when hot water is demanded. Without turning on the faucet, hot water will not be generated and like this you will be able to save energy.

In tankless water heaters also, you can set the temperature as per your requirement just like other water heaters. The temperature in tankless water heater is also variable.

Use of tankless water heater does not affect the flow rate of hot water. The flow rate would remain same as it was in traditional hot water tank of any other type. This type of water heater is more convenient to use as you do not have to wait for hot water and you get it instantly.

A tankless water heater may cost a little more up front than a regular water tank heater would but later on you will cover this extra money. Tankless water heater will save you money every month by reducing the energy bill.

A tankless water heater is not only going to save money on your monthly bills but if everyone in the world would start using tankless water heaters then you can really help the environment by conserving energy.

Scott Rodgers is a noted writer who has been providing ample guidance on plumbing works all across the nation. His expensive knowledge has, in fact, sparked significant rise in revenue for talented plumbers across the nation, from Brooks Plumbers (Need one?click here!) to Social Circle Plumbers (Need one?click here!).

Share and Enjoy:
  • Digg
  • del.icio.us
  • Facebook
  • NewsVine
  • Reddit
  • StumbleUpon
  • Google Bookmarks
  • Yahoo! Buzz
  • Twitter
  • Technorati
  • Live
  • LinkedIn
  • MySpace
  • Share/Bookmark

Sprinkler Heads And Its Repairing Methods

Saturday, May 8th, 2010

Every once in a while you will find that one of the sprinkler heads in your watering system has become damaged, whether due to being run over or breaking from age or usage.

Replacing a sprinkler head is not too difficult – although it’s safe to assume that you will get wet in the process of replacing it. Moreover, if you have a faulty sprinkler head, gather some of the important tools like shovel, pipe wrench and plumber’s tape.

To find out so as to which of the sprinkler head is not working, one need to restore the water supply to the system and then physically inspect each head. It is noted that if one sprinkler has gone bad, the entire system of that particular area may become troublesome. Accumulation of water over a particular area on ground is also indicative of a problematic sprinkler head in that area.

To save water and time, find someone to help you. This person only needs to stand at the timer switch for the sprinkler system. Their job is to turn the water on, and then turn it off once you’ve located the damaged head and the place that it came from.

Dig a hole with a shovel carefully around the broken sprinkler head, giving you just enough room to access the broken head without damaging the rest of the sprinkler pipes.

The repairing process of the sprinkler head includes getting wet from head to toe. Therefore, in such a case make sure you are accordingly attired. When you are ready to remove the head, unscrew it from the threaded connection by turning the head counter clockwise, and thread the new head on clockwise.

Enwrap the Teflon tape over the new sprinkler head. Also secure it with the plumber’s wrench. But before using the plumber’s wrench, determine plastic piping or copper one because, no wrench tightening is required with plastic pipes. Test you repair by turning on water supply to that particular sprinkler. Shut off the water, then.

After the new head has been installed, you can now, put in back the soil that was dug out previously before installation.

Scott Rodgers is a notable writer who has been providing great guidance on plumbing works all over the country. His exemplary knowledge has, in fact, sparked significant rise in revenue for talented plumbers across the nation, from New Hope Plumbers to Sun City West Plumbers .

Share and Enjoy:
  • Digg
  • del.icio.us
  • Facebook
  • NewsVine
  • Reddit
  • StumbleUpon
  • Google Bookmarks
  • Yahoo! Buzz
  • Twitter
  • Technorati
  • Live
  • LinkedIn
  • MySpace
  • Share/Bookmark

Replacing The Broken Sprinkler Pipe

Friday, May 7th, 2010

A broken sprinkler pipe can be a major headache. Not only because it turns your garden into swampy land, but also because broken has pipe wasted a lot of precious water. Moreover, a leaky pipe may damage the nearby foundations as well.

Read on to learn how to save money by repairing a broken sprinkler pipe yourself. Make sure, you have all the things required while making repairs. Like in this case, you will need PVC pipe, PVC sleeve connectors, PVC pipe cutters or hack saw, PVC glue, PVC primer and safety glasses.

To fix a break in PVC, the most important step is to turn off the sprinklers; if you don’t this could be a very hard task. Turning it off can be done by either turning off the water supply to the house at the city meter or shutting down the shut off valve connected to the sprinkler. Moreover, it is also recommended to wear the safety glasses while performing such types of work.

Dig around the area where you believe the broken pipe is. This is usually the area where water is bubbling up. Next take a hack saw and saw a straight edge on either side of the cracked PVC pipe. Remove the broken pipe. Sand the ends with sandpaper to get rid of the rough edge, this also helps to keep the area clean and ready for priming/gluing.

Measure the broken piece and cut a replacement section from the new pipe. Compare your new pipe to make sure that it will fit into the gap. Dry fit the connector sleeves onto the new section and install it on the existing pipe to verify the fit.

Finding the pipe accurately settled, prime the pipe and the connectors with the primer and let it cure for some time.

From here, you will want to put some glue on one end of the PVC sprinkler pipe. One great way to go about this is using popular blue glue, fitting the couplers onto the pipe during the twenty seconds that you have to do this.

Allow the glue to dry according to the directions on the package. Once the new section is completely dry, turn on the water and check for leaks.

Scott Rodgers is an author with great plumbing experience all over the country. His wide and well spread guidance has created business for a lot of Fox Lake Plumbers and Glenview Plumbers . You are welcome to reprint this article – but get your own unique content version here.

Share and Enjoy:
  • Digg
  • del.icio.us
  • Facebook
  • NewsVine
  • Reddit
  • StumbleUpon
  • Google Bookmarks
  • Yahoo! Buzz
  • Twitter
  • Technorati
  • Live
  • LinkedIn
  • MySpace
  • Share/Bookmark